In household plumbing system there are mainly two parts of plumbing systems known as the direct and indirect method of plumbing. Both in direct an indirect method the plumbing works to be done with the help of an experienced plumbing technician. The primary use of setting an indirect plumbing for water supply is to feed water in to a cold water tank so in the indirect method of plumbing system it uses a rising main. Also the pipes and valves and other plumbing fittings in a household plumbing system will get their water supply from the water tank. Generally a household plumbing system starts at the supply of pure clean drinking water through using the supply from any of the water supply undertaking?s stopcock such as a water authority or a company.
Compared to a direct plumbing system an indirect system has many advantages includes the back-siphon age that there is less chance to drawn back water into the mains so there is less risk of contamination of the water supply, and the system usually operates in a constant water pressure which vomits the variations in the mains water pressure, and the last advantage is that the cistern or the tank provides a reserved supply of water to the pipelines when the mains fails.
The indirect plumbing fixture used for the indirect liquid waste receptor is specially designed to collect and transport the wastes to a distant place and then dispose this liquid waste to the drains. Generally a liquid waste receptor will not connect directly with the drainage system but it discharges the liquid waste to an air gap unit which connected physically to a plumbing fixture which has direct connection to a drainage system. Thus by an indirect method it is possible to dispose the water wastes to drain system.
The indirect plumbing system includes mainly two type of plumbing such as the water supply system and a plumbing system for waste compost or drainage. In the water supply system it uses a set of pipes which have been connected with a main water reservoir or a tank to carry clean water to our home both for drinking purpose and for baths, basins etc. Where as the waste system is another type of pipeline arrangements which is used to carry away wastes to drains and sewages. The indirect method of plumbing system is quite simple when considered to the confusing plumb systems in old houses. But most of the indirect plumbing system have a draw off pipe also called two pipes to take water out of a water tank that one pipe connects to the water tank to take water to the cold taps in bathrooms, kitchens etc where as the other pipe feeds in to? a hot water cylinder. The water comes in the hot water cylinder from the water tank is stored and then heated by an electric boiler or a heater. All the indirect methods of plumbing techniques have many advantages with both the watering and waste disposal system.
?
?
Source: http://provider-concierge.com/advantages-of-indirect-plumbing-services.html
rock and roll hall of fame erin andrews erin andrews blagojevich sentence mythbusters cannonball uss arizona myth busters
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.